成人短视频

Welcome to the official website of Suzhou Karl Fannuo Home Furnishing Co., Ltd.!

National office furniture assortment : 15962448886
information centre

Contact Calfano

Contact: Mr. Shao

Phone: 15962448886/18862245948

Address: Unit 202, Orui Building, 299 Dongping Street, Dushu Lake, Suzhou Industrial Park

You are here: Home / News / Industry News

Meeting room chair size selection indirectly affects meeting quality

Time: 2016-05-06

I believe that everyone who has held the meeting is impressed by the row of chairs in the conference room. Some rows of chairs are very comfortable to use, which indirectly affects the quality of the meeting, while others can't find a proper sitting position. 椅子 的尺寸有很大的关系,今天,我们就来讲讲 会议室排椅 的尺寸。 In fact, this has a lot to do with the size of the chairs . Today, we will talk about the size of the row chairs in the conference room .

 

 

First, the back of the chair

 

   最好选择有椅背的,可以时不时地靠一靠,舒缓疲劳。 It is best to choose a chair with a backrest in the conference room . You can lean on it from time to time to relieve fatigue. 度的靠背则可防止骨盆的旋转,增加坐姿的稳定性,使坐姿更接近自然状态,健康舒适。 Analysis based on orthopedic principles and muscle activity: sitting postures where the human waist is straight or leaning forward can easily cause fatigue, while backrests greater than 90 degrees can prevent pelvic rotation, increase the stability of the sitting posture, and make the sitting posture closer to the natural state ,Health and comfort. Determine the angle of the back of the chair, then you need to set the height, width, and thickness. If the back of the chair is high, it will block the view, and if it is short, it leaks out the back, which is unsightly. Also consider the load-bearing capacity of the seat back, which is the thickness. 470*410*12mm ,或者 450*400*11mm The general specifications are 470 * 410 * 12mm , or 450 * 400 * 11mm .

 

 

Sitting width

 

会议室排椅 来说,是设计的重点。 Sitting width is the focus of design for the conference room chairs . 功力 了。 People from all corners of the world have different heights and weights, and if everyone is to sit comfortably, this requires the " skills " of the designer . 480mm 490mm 500mm ,而作为座椅支撑点的坐板,既要承重性好又要坚固,规格尺寸则有: 440*400*11mm 450*410*12mm According to ergonomic principles, when a person sits on a chair, the body's weight is mainly borne by the hip ischial tuberosity. This requires the seat to be spacious and sturdy. The general specifications are: 480mm , 490mm , 500mm , and as a seat support The seat board at the point must not only have good load-bearing capacity but also be sturdy, and the specifications are: 440 * 400 * 11mm , 450 * 410 * 12mm . If the meeting is held frequently and the length of each meeting is long, it is recommended to buy a flip-and-fold form. The material is a conference room chair with a built-in sponge body.

 

 

 

Third, sit deep

 

The seat depth of the row chair in the conference room should correspond to the length of the thigh. After the human body sits down, the knee joint is close to the edge of the chair. 600mm 700mm ,如果座面太深,那么腰部和背部就无法靠到椅背;如果座面太浅,大腿漏了一截出来,没有足够的支撑,会觉得不舒服。 The general specifications are: 600mm , 700mm , if the seat surface is too deep, then the waist and back cannot lean against the seat back; if the seat surface is too shallow, the thigh leaks out, without sufficient support, it will feel uncomfortable.

 

 

 

Fourth, sit high

 

The sitting height here refers to the height from the cushion to the ground. The sitting height of the row chair in the conference room should be less than or equal to the length of the calf. After the human body sits down, the calf naturally hangs down and the heel is supported by the ground. 700mm 750mm 为佳。 If it is too high, your legs will feel very tired and your thigh muscles will be sore after being pressed for a long time; but the seat surface is too low and your thighs cannot be placed on the seat surface, as if you were sitting directly on the ground, and all your body weight is concentrated on your hips It will be uncomfortable over time, preferably from 700mm to 750mm .

 

 

 

 

Conference room chairs are made of fabric, rubber sheet, stainless steel, steel and wood, etc. There are also big differences in size and function. When choosing, it is best to sit down and experience for yourself whether it is comfortable or not. In other words, the comfort of the seat is first.

Free consultation

  • Engineering procurement: QQ
  • Custom furniture: QQ
  • Furniture wholesale: QQ
  • 15962448886
  • Scan and follow us